Conditions for Running the DTC
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
P0335 Condition 1
- DTC P0101, P0102, P0103 = Not set
- Camshaft Position Sensor = Signal received
- MAF Sensor = Greater than 3 g/s
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- DTC P0340, P0341 = Not set
- Engine = Running
Frequency the DTC runs = Continuously - After the running conditions are met
P0336 Condition 1
- DTC P0335, P0651 = Not set
- MAF Sensor = Greater than 3 g/s
- Engine Speed = Greater than 450 RPM
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- DTC P0101, P0102, P0103 = Not set
- Camshaft Position Sensor = Signal received
- MAF Sensor = Greater than 3 g/s
- Starter = Active
Condition 4
- DTC P0340, P0341 = Not set
- Engine = Running
Frequency the DTC runs = Continuously - After the running conditions are met