LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Vent Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
    2. Fig 1: Transmission Vent Hose Assembly, Retainers And Clip Bracket
    GM4751500Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the transmission vent hose assembly retainers (1) from the transmission vent hose clip bracket.
  3. Remove the transmission vent hose assembly from the transmission hose adapter (2).
  4. Remove the transmission vent hose assembly (3) from the vehicle.
scientia non olet · About LEMON Manuals