LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Oil Level Check Plug Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transmission Oil Level Check Plug
    GM4756602Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

  1. Install the transmission oil level check plug (1) and tighten to 9 N.m (80 lb in).
  2. Check the transmission fluid level and fill if necessary. Transmission Fluid Level and Condition Check .
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals