Transmission Mount Replacement (Two Wheel Drive)

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Mount, Crossmember Nut & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Lifting and Jacking the Vehicle Support the transmission with a transmission jack.
1	Transmission Mount to Crossmember Nut CAUTION: Refer to Fastener Caution . Tighten 55 N.m (41 lb ft)
2	Transmission Mount Bolt [2x] Tighten 67 N.m (50 lb ft)
3	Transmission Mount Procedure Raise the transmission with the transmission jack just enough to remove the transmission mount.