LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic transmission range selector lever cable from the transmission. Automatic Transmission Range Selector Lever Cable Replacement 
  2. Remove the control valve body. Control Valve Body Replacement 
    3. Fig 1: Park Pawl Actuator Rod And Transmission Manual Shift Shaft Position Switch
    GM4540962Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD the manual shift shaft pin (1).
    4. Fig 2: Manual Shift Shaft
    GM4540965Courtesy of GENERAL MOTORS COMPANY
  4. Remove the manual shift shaft (1).
scientia non olet · About LEMON Manuals