LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Detent Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Automatic Transmission Fluid Pump Driven Gear Baffle
    GM4540659Courtesy of GENERAL MOTORS COMPANY
  1. Install the manual shift detent (2) to the automatic transmission.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the manual shift detent bolt (1) and tighten to 10 N.m (89 lb in).
  3. Install the control valve body. Control Valve Body Replacement 
  4. Fill the transmission. Transmission Fluid Fill Procedure
scientia non olet · About LEMON Manuals