LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Antilock Brake System) >> Diagnostic Information And Procedures >> DTC P0856: Traction Control Torque Request Circuit >> Circuit/System Testing

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that no other DTCs are set except for P0856.
    • Go to next step: If only DTC P0856 is set 
  2. Replace the K20 Engine Control Module.
  3. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
    • If DTC sets 

      Replace the K17 Electronic Brake Control Module.

    • Go to next step: If DTC does not set 
  4. All OK.