Conditions for Setting the DTC
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
C0110 04 or C0110 06
- A short to ground or an open/high resistance is detected on the pump motor B+ circuit.
- The electronic brake control module detects a low voltage in the pump motor supply circuit when the feedback voltage is less than 4.5 V for greater than 150 ms and the pump motor is not activated.
C0110 61
The pump motor continues to rotate briefly after deactivation creating a feedback voltage. The electronic brake control module sets the DTC if the measured feedback voltage indicates a binding or stalled pump motor.