LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Cushion Outer Trim Panel Replacement

Rear Seat Cushion Outer Trim Panel Replacement

Fig 1: Rear Seat Cushion Outer Trim Panel
GM3640596Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear seat recliner handle. Refer to Rear Seat Recliner Handle Replacement .
1 Rear Seat Cushion Outer Trim Panel

Procedure

  1. Disengage the retainer two tabs that attach outer trim panel to the hinge finish cover with a suitable flat-bladed tool.
  2. Disengage the rear portion of the trim panel first by pulling outward at the retainer clip locations.
  3. Disengage the front portion of the trim panel first by pulling outward at the retainer clip locations.
  4. Remove the outer trim panel by gently pulling the trim panel outboard off the recliner bracket and seat frame.
scientia non olet · About LEMON Manuals