Rear Seat Recliner Actuator Replacement (With Bucket)

Fig 1: Rear Seat Recliner Actuator (With Bucket)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Fold the seat forward. Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement (Bucket) .
1	Rear Seat Recliner Actuator Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Rear Seat Recliner Actuator Assembly Procedure Disconnect the electrical connector. Disconnect the actuator cable assembly.

Callout

Component Name

Preliminary Procedures

Fold the seat forward.
Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement (Bucket) .

Rear Seat Recliner Actuator Screw (Qty: 2)

CAUTION:

Tighten
3 N.m (27 lb in)

Rear Seat Recliner Actuator Assembly

Procedure