LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Shoulder Belt Guide Opening Bezel Replacement (3rd Row Short Wheel Base)

Rear Seat Shoulder Belt Guide Opening Bezel Replacement (3rd Row Short Wheel Base)

Fig 1: Rear Seat Shoulder Belt Guide Opening Bezel (3rd Row Short Wheel Base)
GM3272489Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the 3rd row seat. Refer to 3rd Row Seat Removal and Installation 
  2. Remove the rear seat shoulder belt anchor plate fastener. Refer to 3rd Row Center Seat Belt Retractor Replacement (Short Wheelbase)
1 Rear Seat Shoulder Belt Guide Opening Bezel
CAUTION:

Do not twist the cover during removal. Twisting the cover may cause the component to break.

Procedure

  1. Firmly grasp both sides of the bezel pulling the bottom outward to disengage the bottom of the cover.
  2. Remove the bezel by sliding the cover downward and guiding the lower portion of the belt through the bezel.