Conditions for Setting the DTC

C0575 01, C0580 01, C0585 01, and C0590 01

• A short to voltage or short to ground on the control high circuit is detected.
• A short to ground on the control low circuit is detected.

C0575 02, C0580 02, C0585 02, and C0590 02

• An open or high resistance on the control high or control low circuit is detected.
• A short to voltage on the control low circuit is detected.

C0575 0D, C0575 0E, C0575 1A, C0580 0D, C0580 0E, C0580 1A, C0585 0D, C0585 0E, C0585 1A, C0590 0D, C0590 0E, C0590 1A 

An erratic current on the actuator circuit is detected.