Steering Wheel Pad Accessory Wiring Harness Replacement (Cadillac)

Fig 1: Steering Wheel Pad Accessory Wiring Harness (Cadillac)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the steering wheel spoke cover. Refer to Steering Wheel Spoke Cover Replacement (Cadillac) .
1	Steering Wheel Pad Accessory Wiring Ground Bolt CAUTION: Refer to Fastener Caution . Tighten  2.5 N.m (22 lb in)
2	Steering Wheel Horn Switch Bolt (Qty: 3) Tighten  8 N.m (71 lb in)
3	Steering Wheel Pad Accessory Wiring Harness Procedure  Disconnect any electrical connectors as needed.