Rear Seat Separation (3rd Row Power With AS8)

Fig 1: Rear Seat Separation (3rd Row Power with AS8)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the 3rd row seat. Refer to 3rd Row Seat Removal and Installation . If equipped with power folding seat, disconnect and remove the actuator wiring harness from the seat cushion frame.
1	3rd Row Seat Bolt CAUTION: Refer to Fastener Caution . Tighten 45 N.m (33 lb ft)
2	3rd Row Seat Procedure Separate the 40% side of the seat from the 60% side of the seat by sliding apart.

Callout

Component Name

Preliminary Procedures

Remove the 3rd row seat. Refer to 3rd Row Seat Removal and Installation .
If equipped with power folding seat, disconnect and remove the actuator wiring harness from the seat cushion frame.

3rd Row Seat Bolt

CAUTION:

Tighten
45 N.m (33 lb ft)

3rd Row Seat
Procedure
Separate the 40% side of the seat from the 60% side of the seat by sliding apart.