Instrument Panel Instrument Cluster Hood Replacement (Cadillac)

Fig 1: Instrument Panel Instrument Cluster Hood (Cadillac)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel extension. Refer to Instrument Panel Extension Replacement (Cadillac) . Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement (Cadillac) . Remove the instrument panel lower trim plate applique. Refer to Instrument Panel Lower Trim Plate Applique Replacement (Cadillac) .
1	Instrument Panel Instrument Cluster Hood Bolt (Qty: 11) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Instrument Cluster Hood Procedure Use a flat bladed plastic trim tool in order to release the retainer clips securing the hood to the instrument panel assembly.

Callout

Component Name

Preliminary Procedures

Remove the instrument panel extension. Refer to Instrument Panel Extension Replacement (Cadillac) .
Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement (Cadillac) .
Remove the instrument panel lower trim plate applique. Refer to Instrument Panel Lower Trim Plate Applique Replacement (Cadillac) .

Instrument Panel Instrument Cluster Hood Bolt (Qty: 11)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Instrument Panel Instrument Cluster Hood
Procedure
Use a flat bladed plastic trim tool in order to release the retainer clips securing the hood to the instrument panel assembly.