LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - JATCO CVT) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Position Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the automatic transmission range select lever. Refer to Automatic Transmission Range Selector Lever Replacement .
  2. GM4112701Courtesy of GENERAL MOTORS COMPANY

    Disconnect the manual shift shaft position switch electrical connector (1) from the manual shift shaft position switch (2).

  3. Remove the manual shift shaft position switch bolts (3).
  4. Remove the manual shift shaft position switch (2) from the transmission.
scientia non olet · About LEMON Manuals