Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2796 - Condition 1
Auxiliary Transmission Fluid Pump Feedback duty cycle = Not between 46 and 54% - For greater than 1 s
P2796 - Condition 2
Auxiliary Transmission Fluid Pump Feedback duty cycle = Not between 26 and 34% - For greater than 1 s
P2797
- Secondary Pulley Pressure = Less than 0.06 MPa (8.7 PSI)
P2799
- Auxiliary Transmission Fluid Pump Feedback duty cycle = Greater than 0% - For 1 s