Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
- DTC P0741, P0742, P0796, P0797, P2714, P2715 set due to non-electrical transmission hydraulic/mechanical performance issues.
- The pressure control solenoid valves have no electrical faults but the transmission control module detects greater than acceptable pressure or less than acceptable pressure. (P0742, P0796, P0797, P2714, P2715 only)
- The torque converter clutch pressure control solenoid valve has no electrical faults but the transmission control module detects the lock-up coast value is less than or equal to 100 kPa (14 PSI). (P0742 only)