LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - JATCO CVT) >> Description and Operation >> Electronic Component Description >> Low Brake Solenoid Valve

Low Brake Solenoid Valve

WARNING: This page is about a different variant/trim than selected.

The low brake solenoid valve is installed to the control valve body and adjusts the tightening pressure of the low brake.

The low brake solenoid valve uses the linear solenoid valve [N/L (normal low) type].

NOTE:
  • The principle of the linear solenoid valve utilizes the fact that the force pressing on the valve spool installed inside the coil increases nearly in proportion to the current. This allows it to produce the fluid pressure that is proportional to this pressing force.
  • The N/L (normal low) does not produce hydraulic control when the coil is not energized.
scientia non olet · About LEMON Manuals