LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - JATCO CVT) >> Description and Operation >> Electronic Component Description >> High Clutch and Reverse Brake Solenoid Valve

High Clutch and Reverse Brake Solenoid Valve

WARNING: This page is about a different variant/trim than selected.

The high clutch & reverse brake solenoid valve is installed to the control valve body and adjusts the tightening pressure of the high clutch and reverse brake.

The high clutch & reverse brake solenoid valve uses the linear solenoid valve [N/H (normal high) type].

NOTE:
  • The principle of the linear solenoid valve utilizes the fact that the force pressing on the valve spool installed inside the coil increases nearly in proportion to the current. This allows it to produce the fluid pressure that is proportional to this pressing force.
  • The N/H (normal high) produces hydraulic control when the coil is not energized.
scientia non olet · About LEMON Manuals