LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transmission Cooling System) >> Repair Instructions >> Transmission Fluid Cooler Pipe Connector Replacement - Radiator >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the transmission oil cooler pipes from the oil cooler fittings on the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  3. GM1443001Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not remove the upper and lower transmission oil cooler fittings from the radiator at the same time other wise the transmission oil cooler will fall inside the radiator end tank.

    Remove the oil cooler fitting from the radiator.