5th-Reverse Gear Shift Shaft Assembly
WARNING: This page is about a different variant/trim than selected.
Place the shift shaft into a vise with a protector.
- Install the 5th gear shift yoke (4).
- Install the new 5th gear shift yoke pin (3) using a pin punch and a hammer.
- Install the reverse gear shift arm (2).
- Install the new reverse gear shift arm pin (1) using a pin punch and a hammer.
Install the reverse shift guide ball and spring (2).
- Install the 5th-reverse gear ball (3).
- Install the shift shaft by pushing (1).
- Install 5th-reverse gear shift shaft assembly into the gear unit.
- Install the gear unit. Refer to Transmission Assemble .