LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission - Y4A/Y4M) >> Diagnostic Information and Procedures >> Transmission Noisy >> Checking Bearing Noise

Checking Bearing Noise

WARNING: This page is about a different variant/trim than selected.

Differential Side Bearing Noise 

Differential side bearing noise and wheel bearing noise can be confused easily. Since side bearings are pre-loaded, a differential side bearing noise should not diminish much when the differential/transmission is run with the wheels off the ground.

Wheel Bearing Noise 

Wheel bearings produce a rough growl or grating sound that will continue when the vehicle is coasting and the transmission is in NEUTRAL. Since wheel bearings are not pre-loaded, a wheel bearing noise should diminish considerably when the wheels are off the ground.

Checks Actions
Insufficient Lubricant Supply the lubricant.
Worn Input Shaft Gear Replace the gear.
Worn Bearings on the Input Shaft Gears Replace the bearing.
Worn Clutch Release Bearing Replace the clutch release bearing.
Worn Bearings on the Input Shaft or Counter Shaft Replace the bearing.
Worn Input Shaft or Counter Shaft Gear Replace the gear.
Worn or Damaged Synchronizer Ring Replace the synchronizer ring.
Worn or Damaged Synchronizer Sleeve Replace the synchronizer sleeve.
Worn Differential Gear or Bearing Replace the gear or bearing.
Worn or Damaged Synchronizer Ring in the selected Gear Range Replace the synchronizer ring.
Worn or Damaged Gear in the selected Gear Range Replace the gear.
Worn or Damaged Bearing in the selected Gear Range Replace the bearing.