Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0806
- DTC P0335, P0336, P0502, P0503, P0807, or P0808 is not set.
- Engine is providing torque to wheels.
- Engine speed to transmission output speed match a valid gear ratio.
- Vehicle speed is greater than 8 kmh (5 mph).
- DTC runs continuously when the above conditions are met.
P0807 and P0808
- DTC P0651 is not set.
- Ignition is ON.
- Engine is not cranking.
- System voltage is more than 9 V.
- DTC runs continuously when the above conditions are met.