LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (M/T Clutch) >> Repair Instructions >> Clutch Master Cylinder Reservoir Hose Replacement (Left Hand Drive) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING:

Refer to Brake Fluid Irritant Warning .

  1. Remove the battery tray. Refer to Battery Tray Replacement (without Engine Block Heater)Battery Tray Replacement (with Engine Block Heater) .
  2. Remove the brake pressure modulator valve bracket. Refer to Brake Pressure Modulator Valve Bracket Replacement .
  3. GM4010312Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Before disconnecting the reservoir tank hose, remove the clutch/brake fluid from the reservoir tank.

    Remove the clutch master cylinder reservoir hose (1) from the reservoir tank and the clutch master cylinder.