Fire Hazards
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- In order to prevent fire hazards in conjunction with cutting, grinding or welding operations and material processing, the appropriate guidelines and regulations with regard to accident prevention issued by the specific national authorities must be observed.
- During cutting operations, grinding operations or welding operations, ensure that a suitable device for extraction of vapors and dust particles is present. This is especially applicable to galvanized body components.
- Additional protection is required for flying sparks.
- Follow storage instructions on container packages when storing solvent-containing substances - fire hazard.
- Avoid naked flames.
- Fire extinguishers must be available in adequate numbers and routinely serviced.