LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Parking Brake System) >> Repair Instructions >> Parking Brake Lever Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake lever assembly (2) to the vehicle.
    Fig 1: Park Brake Lever Nuts And Park Brake Lever Assembly
    GM4011569Courtesy of GENERAL MOTORS COMPANY
  2. Install the park brake lever nuts (1) and tighten to 22 N.m (16 lb ft).
    CAUTION: Refer to Fastener Caution .
  3. Install the left and right park brake cables (1) to the park brake cable equalizer (2).
    Fig 2: Left And Right Park Brake Cables And Park Brake Cable Equalizer
    GM4011568Courtesy of GENERAL MOTORS COMPANY
  4. Adjust the park brake cable tension. Refer to Parking Brake Adjustment .
  5. Install the front floor console. Refer to Front Floor Console Replacement .