LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Parking Brake System) >> Diagnostic Information and Procedures >> Park Brake Hardware Inspection

Park Brake Hardware Inspection

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Visually inspect the park brake lever (1) and the lever pivot pin (2) for the following conditions:
    Fig 1: Park Brake Lever And Pivot Pin
    GM2308635Courtesy of GENERAL MOTORS COMPANY
    WARNING: Refer to Brake Dust Warning .
    • The lever being bent or broken at any point - particularly at the cable attachment
    • A seized or binding condition at lever pivot pin
    • A broken lever pivot pin
  2. If any of the conditions listed were found, the park brake lever and brake shoe assembly requires replacement.
    NOTE: The brake shoe and park brake lever are not serviced separately. If either component requires replacement, they must be replaced as an assembly.
scientia non olet · About LEMON Manuals