Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to Brake Dust Warning .

Raise and support the vehicle. Refer to Vehicle Lifting and Jacking Caution .
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Remove the brake drum. Refer to Brake Drum Replacement .
Remove the spring fastener (1) and upper brake shoe return spring (2).

Fig 1: Spring Fastener And Upper Brake Shoe Return Spring
Courtesy of GENERAL MOTORS COMPANY
Remove brake adjuster actuator lever spring (1).

Fig 2: Brake Adjuster Actuator Lever Spring
Courtesy of GENERAL MOTORS COMPANY
Remove the brake adjuster actuator lever (1).

Fig 3: Brake Adjuster Actuator Lever
Courtesy of GENERAL MOTORS COMPANY
Spread the top of the brake shoes apart slightly and remove the brake shoe adjuster (1).

Fig 4: Brake Shoe Adjuster
Courtesy of GENERAL MOTORS COMPANY
Inspect the drum brake adjusting hardware and replace any damaged components as necessary. Refer to Drum Brake Adjusting Hardware Inspection .
Disassemble the brake shoe adjuster and thoroughly clean the adjuster screw threads of any corrosion.