LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Drum Brake System) >> Repair Instructions >> Drum Brake Adjusting Hardware Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a light coat of high temperature brake lubricant to the brake shoe adjuster screw threads.
  2. Assemble the brake shoe adjuster, setting the adjuster to the fully retracted position.
  3. Spread the top of the brake shoes apart slightly and install the brake shoe adjuster (1).
    Fig 1: Brake Shoe Adjuster
    GM4002639Courtesy of GENERAL MOTORS COMPANY
  4. Install the brake adjuster actuator lever (1).
    Fig 2: Brake Adjuster Actuator Lever
    GM4002637Courtesy of GENERAL MOTORS COMPANY
  5. Install the brake adjuster actuator lever spring (1).
    Fig 3: Brake Adjuster Actuator Lever Spring
    GM4002634Courtesy of GENERAL MOTORS COMPANY
  6. Install the spring fastener (1) and upper brake shoe return spring (2).
    Fig 4: Spring Fastener And Upper Brake Shoe Return Spring
    GM4002633Courtesy of GENERAL MOTORS COMPANY
  7. Adjust the drum brakes. Refer to Drum Brake Adjustment .
  8. Install the brake drum. Refer to Brake Drum Replacement .
  9. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals