Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
Rear Shock Absorber (1) @ Vehicle - Remove - Shock Absorber Replacement

Fig 1: Rear Shock Absorber
Courtesy of GENERAL MOTORS COMPANY
Use the CH-51095 shock absorber strut nut wrench (1) or equivalent to remove the rear suspension shock absorber upper mounting nut.

Fig 2: Shock Absorber Strut Nut Wrench
Courtesy of GENERAL MOTORS COMPANY
Rear Suspension Shock Absorber Upper Mounting Nut (1) - Remove

Fig 3: Rear Shock Absorber Bumper And Mount
Courtesy of GENERAL MOTORS COMPANY
Rear Shock Absorber Mount (2) @ Rear Shock Absorber - Remove
Rear Shock Absorber Bumper (3) @ Rear Shock Absorber - Remove