LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Seat Belt System) >> Diagnostic Information and Procedures >> DTC B0072 or B0073: Driver/Passenger Seat Belt Switch Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the appropriate scan tool Seat Belt Status parameter changes between Buckled and Unbuckled when the seat belt is buckled and unbuckled.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  3. All OK.
scientia non olet · About LEMON Manuals