LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C056E: Electronic Control Unit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

DTC C056E 41

  1. Ignition ON.
  2. Verify that DTC C056E 41 is not set.
    • If the DTC C056E 41 is set 
    1. Program the K43 Power Steering Control Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the K43 Power Steering Control Module.
      • If the DTC does not set
    3. All OK.
    • If the DTC C056E 41 is not set 
  3. All OK.

DTC C056E 4B

  1. Ignition ON.
  2. Verify that DTC C056E 4B is not set.
    • If the DTC C056E 4B is set 
    1. Program the K43 Power Steering Control Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the K43 Power Steering Control Module.
      • If the DTC does not set
    3. All OK.
    • If the DTC C056E 4B is not set 
  3. All OK.