LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C056E: Electronic Control Unit >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

After replacement of the power steering control module, the power steering control module must be configured with the proper tuning profile using the service programming system (SPS).

After replacement of the power steering control module, power steering motor or steering gear, the steering position/torque sensor calibration procedure must be performed.