Special Tools

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

DT-113-2 Bracket
EN-840 Pliers/Remover
EN-6167 Support Set
EN-6215 Mounting Equipment
EN-46122 Camshaft Position Actuator Check-Ball Valve Remover/Installer
EN-49155 Demounting Piece
EN-49074 Universal Valve Spring Compressor Kit

For equivalent regional tools, refer to Special Tools .

Ensure DT-113-2 bracket is mounted appropriately to a work bench.
Install EN-6215-1 mounting table to DT-113-2 bracket.
Install the cylinder head to EN-6215-1 mounting table with the appropriate bolts packaged with EN-6215 .