LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Cylinder Head Cleaning and Inspection >> Camshaft Journal Alignment

Camshaft Journal Alignment

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the camshafts are serviceable.
  2. Inspect the cylinder head camshaft bearing surfaces for any imperfections or scratches that could inhibit proper camshaft clearances. Repair minor imperfections or scratches.
  3. Install the camshafts in the cylinder head.
  4. Install the camshaft bearing caps.
  5. Install the camshaft cap bolts and tighten to 10 N.m (89 lb in).
  6. Ensure the camshafts spin freely in the cylinder head. If the camshaft does not run freely, replace the cylinder head.
scientia non olet · About LEMON Manuals