Typical Scan Tool Data
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
The Typical Scan Tool Data table identifies a scan tool data parameter and its value in reference to potential circuit faults.
An example table from an ECT procedure:
ECT Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine=Idling - At normal operating temperature. Parameter Normal Range: 88 to 105°C (190 to 221°F) |
|||
| Signal | 140°C (248°F) | -40°C (-40°F) | -40°C (-40°F) |
| Low Reference | - | -40°C (-40°F) | - |