LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Object Detection System) >> Diagnostic Information and Procedures >> DTC B096C or B096D: Parking Assist Side Sensor Circuit >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

B096C 01, B096D 01 

The Advanced Parking Assist Control Module has determined the sensor signal voltage is too high.

B096C 06, B096D 06 

The Advanced Parking Assist Control Module has determined the sensor signal voltage is too low.

B096C 08, B096D 08 

The Advanced Parking Assist Control Module has received an invalid signal.

B096C 21, B096D 21 

The Advanced Parking Assist Control Module has determined no change in the position of an object while the vehicle is in motion.

B096C 3A, B096D 3A 

The Advanced Parking Assist Control Module has determined the wrong sensor type is installed.

scientia non olet · About LEMON Manuals