Blower Switch
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the harness connector at the S94 Blower Motor Switch.
- Test for infinite resistance between the ground terminal 3 and each control terminal with the blower switch in the OFF position.
- If less than infinite resistance
Replace the S94 Blower Motor Switch.
- If infinite resistance
- If less than infinite resistance
- Test for less than 2 Ω between the ground terminal 3 and each control terminal with the switch in the appropriate position.
- If 2 Ω or greater
Replace the S94 Blower Motor Switch.
- If less than 2 Ω
- If 2 Ω or greater
- All OK.