Circuit/System Verification
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.NOTE: Refer to HVAC System Malfunction before performing this procedure.
- Verify the scan tool ECM A/C Request Signal parameter changes from No to Yes under both of the following conditions listed below:
- Defrost mode selected with blower ON, A/C switch OFF
- A/C switch depressed with blower ON, temperature controls at their coolest setting and mode controls in any position other than defrost mode
- If NO under one or both of the conditions above
Replace the K33 HVAC Control Module.
- If YES under both of the conditions above
Refer to DTC P0645, P0646 or P0647 ,