Circuit/System Verification
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the Q2 A/C Compressor Clutch engages and disengages when commanding the ECM A/C Compressor Clutch Relay On and Off with a scan tool.
- If the Q2 A/C Compressor Clutch does not engage or disengage
Refer to Circuit/System Testing.
- If the Q2 A/C Compressor Clutch engages and disengages
- If the Q2 A/C Compressor Clutch does not engage or disengage
- All OK.