LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Back Cushion Removal and Installation (Base)

Rear Seat Back Cushion Removal and Installation (Base)

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Back Cushion (Base)
GM4025185Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Base) .
  2. Remove the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement .
1 Rear Seat Back Cushion Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten 
24 N.m (18 lb ft)
2 Rear Seat Back Cushion Nut (Qty: 1)
Tighten 
24 N.m (18 lb ft)
3 Rear Seat Back Cushion
scientia non olet · About LEMON Manuals