LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Door Lock System And Release Systems) >> Repair Instructions >> Front Side Door Lock Cylinder Bezel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Side Door Lock Cylinder Screw Access Plug And Cylinder Clamp Screw
    GM4025073Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do Not remove the cylinder clamp screw completely from the housing, unscrew the screw to a hard stop, releasing the cylinder from the housing.

  1. Remove the front side door lock cylinder screw access plug (1) and front side door lock cylinder clamp screw (2).
  2. Fig 2: Front Side Door Cylinder And Bezel Assembly
    GM4757068Courtesy of GENERAL MOTORS COMPANY
  3. Pull the front side door cylinder and bezel assembly (1) gently from the front side door handle.
  4. Fig 3: Front Side Door Lock Cylinder And Bezel
    GM4757069Courtesy of GENERAL MOTORS COMPANY
  5. Remove the front side door lock cylinder bezel (1) from front side door lock cylinder (2).