LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B297B or B297C: Driver Door Open Switch Circuit >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: A23D Door Latch Assembly - Driver
  3. Test for infinite resistance between the test points: Signal terminal C & Ground terminal D - The switch is in the open position.
    • If less than infinite resistance 

      Replace the component: A23D Door Latch Assembly - Driver

    • If infinite resistance 
  4. Test for less than 3 ohms between the test points: Signal terminal C & Ground terminal D - The switch is in the closed position.
    • If 3 ohms or greater 

      Replace the component: A23D Door Latch Assembly - Driver

    • If less than 3 ohms 
  5. All OK.
scientia non olet · About LEMON Manuals