Circuit/System Verification
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Drive the vehicle in a straight line at a speed greater than 40 km/h (25 MPH).
- Verify all scan tool Wheel Speed Sensor parameters are within 1.6 km/h (1 MPH) of each other.
- If any parameter is not within 1.6 km/h (1 MPH) of each other.
Refer to Circuit/System Testing.
- If each parameter is within 1.6 km/h (1 MPH) of each other.
- If any parameter is not within 1.6 km/h (1 MPH) of each other.
- All OK.