LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Hydraulic Brake System) >> Repair Instructions >> Power Brake Booster Vacuum Check Valve and Hose Replacement (LHD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Vacuum Brake Booster Check Valve And Vacuum Hose
    GM4007494Courtesy of GENERAL MOTORS COMPANY
  1. Install the vacuum brake booster check valve (1) to the vacuum hose (2), as necessary.
    2. Fig 2: Vacuum Hose, Vacuum Brake Booster Check Valve And Vacuum Brake Booster
    GM4007488Courtesy of GENERAL MOTORS COMPANY
  2. Install the vacuum hose and the vacuum brake booster check valve (1) to the vacuum brake booster (2).
    3. Fig 3: Vacuum Hose And Vacuum Pump
    GM4007468Courtesy of GENERAL MOTORS COMPANY
  3. Connect the vacuum hose (1) to the vacuum pump (2) in an engine.
  4. Connect the electrical connector to the power brake booster vacuum sensor, as equipped.
scientia non olet · About LEMON Manuals