Removal Procedure
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove Battery Tray. Refer to Battery Tray Replacement (without Engine Block Heater)Battery Tray Replacement (with Engine Block Heater)
- Remove Brake Pressure Modulator Valve Secondary Pipe. Refer to Brake Pressure Modulator Valve Secondary Pipe Replacement (LHD) Brake Pressure Modulator Valve Secondary Pipe Replacement (RHD)
- Remove Brake Pressure Modulator Valve Primary Pipe. Refer to Brake Pressure Modulator Valve Primary Pipe Replacement (LHD) Brake Pressure Modulator Valve Primary Pipe Replacement (RHD)
- Remove EBCM/BPMV and Bracket Assembly (1) @ Vehicle. Refer to Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
- Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
- Remove Front Bumper Fascia Opening Lower Cover-Left Side. Refer to Front Bumper Fascia Opening Lower Cover Replacement
- Remove Front Brake Pipe Fitting (1) @ Front Brake Hose (2)
- Unclip Front Brake Pipe (1) @ Brake Pipe Clip (2)
- Unclip Front Brake Pipe (1) @ Brake Pipe Clip (2)
- Remove Front Brake Pipe (1) @ Vehicle