LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement (L5Q) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hydraulic valve lash adjuster arm. Refer to Hydraulic Valve Lash Adjuster Arm Replacement (L5Q) .
  2. Components MUST be separated, marked or organized in a way to ensure installation to their original location and position. Take precautions in order to prevent interchanging of parts.
    Fig 1: Hydraulic Valve Lash Adjusters
    GM4036753Courtesy of GENERAL MOTORS COMPANY
    NOTE: Many internal engine components will develop specific wear patterns on their friction surfaces.
  3. Tag or mark each part immediately when removed. Indicate location, direction or orientation when necessary.
  4. Remove the 12 hydraulic valve lash adjusters (1).
scientia non olet · About LEMON Manuals