LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Control Module Wiring Harness Replacement (LV7)

Engine Oil Level Indicator Control Module Wiring Harness Replacement (LV7)

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Oil Level Indicator Control Module Wiring Harness (LV7)
GM4230642Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the lower oil pan. Refer to Lower Oil Pan Replacement (LV7) .
  2. Disconnect the engine oil level indicator control module wiring harness connector.
1 Engine Oil Level Indicator Control Module Wiring Harness Bolt
CAUTION: Refer to Fastener Caution .

Procedure 
Remove the engine oil level indicator control module wiring harness bolt.
Tighten 
10 N.m (89 lb in)
2 Engine Oil Level Indicator Control Module Wiring Harness
scientia non olet · About LEMON Manuals