LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Install the engine support fixture. Refer to Engine Support Fixture (LV7) Engine Support Fixture (L5Q) .
  3. Remove the air conditioning evaporator tube bracket nut (1) and make the air conditioning evaporator hose (2) moved in order to get a tool access to the engine mount frame side bracket bolt. Refer to Air Conditioning Evaporator Hose Assembly Replacement (L5Q)Air Conditioning Evaporator Hose Assembly Replacement (LV7) .
    Fig 1: Air Conditioning Evaporator Tube Bracket Nut And Air Conditioning Evaporator Hose
    GM4043896Courtesy of GENERAL MOTORS COMPANY
  4. Remove and DISCARD the engine mount bolts (1).
    Fig 2: Engine Mount Bolts
    GM4043897Courtesy of GENERAL MOTORS COMPANY
  5. Remove the engine mount frame side bracket bolt (1).
    Fig 3: Engine Mount Frame Side Bracket Bolt
    GM4043898Courtesy of GENERAL MOTORS COMPANY
  6. Remove the engine mount frame side bracket nuts (1).
    Fig 4: Engine Mount And Frame Side Bracket Nuts
    GM4043900Courtesy of GENERAL MOTORS COMPANY
  7. Remove the engine mount (2) from the vehicle.
scientia non olet · About LEMON Manuals